Custom Made Boxes, Inc

Custom Box Styles

Image of a Regular Slotted Carton.REGULAR SLOTTED CARTON (RSC)

The Regular Slotted Carton is the most common and economical box style to manufacture. All flaps of an RSC are the same length and meet at the center of the box.

Options: Glued or Stapled Joint 

Smallest dimension: 2"

Width cannot be less than 3"

Get a free quote


Image of a Full Overlap Carton.

FULL OVERLAP CARTON (FOL)

The Full Overlap Carton's (FOL) outer flaps overlap which makes it unusually resistant to rough handling. The FOL box design enables it to be stacked on its side because of the extra corrugated board on the top and bottom panels.

Options: Glued or Stapled Joint

Smallest dimension: 2"

Get a free quote


Image of a Half-Slotted Carton.HALF-SLOTTED CARTON (HSC)

The Half-Slotted Carton (HSC) with cover is a combination shipping and shelf package. The HSC has great resistance to buckling when stacked and is handy in applications where the cover will be removed repeatedly. HSC covers can vary to extend from a few inches of the box depth down to the full box depth.

Options: Glued or Stapled Joint

Smallest dimension: 2"

Get a free quote


Image of a Telescoping Tray Custom Style.TELESCOPING TRAY

The Telescoping Tray is used for handling trays or for packaging large thin items in telescope style carton. The cover can vary to extend from a few inches of the box depth down to the full box depth.

Options: (Customer Glues or Staples Tabs to sidewall)

Smallest dimension: 2"

Get a free quote


Image of a Double Cover Custom Style.

DOUBLE COVER

The Double Cover box is designed for very large items. It uses a telescoping tray as the top and bottom of the box. The trays telescope over a large cardboard sleeve that cover the remainder of your product.

Options: Center sleeve may be glued or stapled
(Customer Staples Tabs to sidewall on covers)

Get a free quote


Image of a One-Piece Folder.ONE-PIECE FOLDER

The One-piece Folder is designed for small flat items. Its unique design allows it to have multiple scores and therefore allow flexibility as to how much they can hold. These boxes may be scored and folded for up to 3 sizes for one box. The one-piece folder is very well suited for shipping books, videos, and other small flat items.

Can be made under 1"

Dimensions go largest to smallest

Get a free quote


Image of a Five Panel Folder. FIVE PANEL FOLDER (FPF)

The Five Panel Folder (FPF), when assembled, has multi-layered corrugated ends that make it an excellent container for the shipment of long items of small diameter. The FPF design offers extra support to prevent shipped merchandise from piercing through the ends.

Smallest dimension: 1.5"

Dimensions go largest to smallest

Get a free quote


Image of a five panel folder box.FIVE PANEL FOLDER - CENTER FOLD (FPFCF)

The Five Panel Folder - Center Fold (FPFCF) is much like the five panel folder above. With the FPFCF, you set your product on the box and wrap the box around it. The difference is, with the FPFCF the flaps come together in the center of the top of the box. This type of box is best for shipping flat items like framed items and signs.

Smallest dimension: 1.5"

Dimensions go largest to smallest

Get a free quote


Image of Divider Elements for boxes.DIVIDER ELEMENT

The Divider Element is available for making partition dividers for separating your products.

Get a free quote


Image of Pads, scored pads, and packing pieces for boxes.

PADS, SCORED PADS AND PACKING PIECES

Cut-to-size pads, angles, corner pieces, scored pads and inner packing pieces are used to meet carrier packaging regulations. These inner packing pieces also firmly hold merchandise and offer additional strength and support to the shipping container.

Get a free quote

© 2024 Custom Made Boxes, Inc. All rights reserved.